4
EntirelyCrimson
EntirelyCrimsonEntirelyCrimson   



No more roll pin!

Quickly, safely, and easily install or 

remove your trigger guard any time

with no modification to your receiver

Don't break your AR with the Roll Pin!

EC's Upgrade Screw Kit

Each kit includes: 

    • One screw for the front of the guard
    • Two  screws for the rear of the guard
    • Three threaded inserts  
    • KITS DO NOT INCLUDE TRIGGER GUARDS
$2 per kit  



 Magpul Poly  Instructions:

The front hole does not require any modification. There is only one hole and only one screw for the front.
The rear trigger guard hole must be drilled with a 5/32" bit to make proper room for the inserts.
The smooth side of the insert faces out and the side with the slot faces into the hole, as shown in the pictures.
Carefully press one insert at a time into each side of the rear hole. Keep the insert straight at all times to avoid damaging them.



 Aluminum  Instructions:

The front hole must be drilled with a 5/32" bit to make proper room for the insert.
The smooth side of the insert faces out on the right side of the guard with the slotted end faceing into the hole. 
Carefully press the insert into the right side of the front hole. Keep the insert straight at all times to avoid damaging them.
The rear trigger guard hole must be drilled with a 5/32" bit to make proper room for the inserts.
The smooth side of the insert faces out and the side with the slot faces into the hole, as shown in the pictures.
Carefully press one insert at a time into each side of the rear hole. Keep the insert straight at all times to avoid damaging them.





Tips:
A small arbor press works best but pliers, vice grips, or channel locks work well too if you are careful.

One small screw goes in each side of the rear of the guard into the inserts.


LCRW and many brands other than Magpul Polymer will require the front insert like the aluminum guards.

The longer screw is for the front right hole. There is no hole on the left front side.
 
Primer Tube Rack
Primer Tube organizer and rack options


$6 each  Click Here to go to the Buy Page
Markeez Brass Marker for
Annealeeze Machine

Markeez marker holder for Annealeez machine
$15   Click Here to go to the Buy Page 


Magpul Trigger Guards &
Screw Kit Installed
Magpul MOE with USK installed








Billet Primer Tube StandEntirelyCrimson Primer Tube Stand for Dillon
$22      Click Here to go to the Buy Page
XL-650 Index Bearing BlockIndex Bearing Block for Dillon XL-650 Progressive Reloading Press
$17   
Locator Pin Pull Tabs
EntirelyCrimson Primer Tube Stand for Dillon
$2 per set  Click Here to go to the Buy Page

Engraved Toolhead Tags
Custom Toolhead Caliber ID Tags


$7 each  Click Here to go to the Buy Page
Aluminum XL-650 Primer Chute
Primer Chute for Dillon 650
$42  


Primer Follower Holder
Primer Follower Hook for Dillon








$15    

Engraved Dust Covers
Custom Toolhead Caliber ID Tags


$25 each  Click Here to go to the Buy Page
1050 Case Adapter Housing
Primer Chute for Dillon 650
$65 

Revolver Primer Tube Stand
Primer Chute for Dillon 650







$TBD
Spent Primer Chute XL650
Custom Toolhead Caliber ID Tags


$13   Click Here to go to the Buy Page
Spent Primer Chute for Summit
Spent Primer Chute for RCBS Summit
$24   Click Here to go to the Buy Page

Box for Hornady Puller
Box for Hornady Bullet Puller and Collets









Special order only
Powder Measure Strainers
Strainers for Powder Measures
 Click Here to go to the Buy Page
coming soon
coming soon

Coming soon
coming soon
coming soon

Coming soon

                                               Shipping is only available in the USA at this time


Contact  Austin@EntirelyCrimson.com
       PO Box 5915 Twin Falls ID 83303-5915      
Copyright © 2012 EntirelyCrimson LLC