Billet Aluminum Spend Primer Chute for the Dillon Precision CP-2000, RL-1100 and Super 1050, and RL-1050 progressive reloading presses. Other versions are available for each of the other presses.
Funnel your spent primers into a larger container under your bench and save them for recycle (primers are brass). Less interruptions while reloading because you won't need to empty the little plastic bin that comes with the press.
Replaces the plastic OEM bin and bracket. Allows easy attachment of 1/2" inside diameter tube (tube not included). Reuse the original 10-24 X3/8” screw from the OEM spent primer bin bracket to install this chute. The slot for the screw allows adjusting funnel to position against the press to keep it in position. The funnel will be offset slightly under the spent primer hole in the press deck, not fit directly under the hole. Due to the press being cast, there are slight deviations from one to another and there will usually be a bit of a gap above this spent primer chute when it positioned properly. Often there is also a slight gap behind the flat area behind the screw. See the install video for example.