Index Bearing Block

EC Index Bearing Block for XL-650

Replaces the steel rub block for smoother action with less drag and resistance.

For use with the current production Dillon XL-650.
Align the block fore or aft to time the indexing of the shell plate.
Barely snug the two mounting bolts so you can still slide the bearing block.
Move your press gently to the priming seating position and visually check alignment.
The primer seating stem should be up and centered in the shell plate slot.
If it is not centered adjust the block fore or aft as needed then tighten the mounting bolts.
This is not intened to be used with swage kits or without the OEM priming system installed.


Contact  Austin@EntirelyCrimson.com
       Copyright © 2012 EntirelyCrimson LLC